a) Cable: Tension cable is the most economical option. Available for all diameters, Single cable up to 30" diameter and double up to 48" diameter and triple above that. Snaphooks are spaced on 36" centers and available in plastic, stainless steel. Cable is available in galvanized, Stainless steel, and vinyl coated. The system consists of a cable (3/16" diameter), turnbuckle, eyebolts and cable clamps.
b) Halo Suspension: New Halo Tension suspension system (HTS) gives the appearance of your FlowCon diffuser system to be inflated when the air handling system is off. This option can be used with a simple one row cable suspension or single HD rail to keep the FlowCon diffuser looking inflated without airflow. Limited from 10" to 36" diameter, this option is perfect for applications where deflated diffuser hand down is a problem. Sections can easily be taken down and washed with no extra labor. Components include standard one row tension cable or our HD single rail system.
c) HD Rail: New HD anodized aluminum rail is our premium rail system. Sleek smooth look for our FlowCon fabric diffuser system. Available for all diameters, Single rail up to 30" diameter and double up to 48" diameter and triple above that. Gliders are spaced on 36" centers and available in plastic. The system consists of HD rail, rail supports, couplers, and vertical supports (speed links). Radius bends are available to meet elbow radius.
d) Flush Rail: Flush anodized aluminum rail can be used for applications that FlowCon diffuser system has to be near ceiling. Flush rail has to be attached to a flat ceiling or T-Bar system. Flush mount rail is designed to support our 'D' Duct diffusers. D duct diffusers are used when ceiling height is a concern. A double Flush rail system is needed to support the 'D' duct diffuser. Sizes from 6" to 18" radius (12" to 36" wide) are available. The system consists of the Flush mount rail, and end piece. Radius bends are available.